Directions for the Installation of a Horton Scope Mount

Horton produces professional-grade crossbows used by sportsmen around the world. A scope can usually be attached to your Horton crossbow, provided it has a rail-type scope mount. Horton crossbows are designed for the easy installation of a rail mount to the rear sight. Most crossbow scopes are produced with scope rings compatible with rail mounts; the scopes are designed for the limited range of crossbow.

Things You'll Need

  • Allen wrench
  • Screwdriver
Show More

Instructions

    • 1

      Remove the hex screw with your Allen wrench. It is located near the front of the rear sight on the left side.

    • 2

      Remove the rear retention screw; it is accessible from the top of the rear sight.

    • 3

      Place your mount on top of the rear sight. Align the hex screw hole on the side -- and the retention screw on the top -- with the corresponding holes on the rail mount.

    • 4

      Screw the hex screw into the side of the rail mount with your Allen wrench. Screw the retention screw back into position with your screwdriver.