How to Restring Crossbows

Stringing a cross bow is a delicate process. The external pressure on the bow must be tight enough to hold back the cross pieces of the bow as you attach the new string This is generally done with something called a cross bow stringer, which creates the needed tension to fix the new string. Although the process is simple enough, it actually takes a lot of muscle power and precision to complete. As a result, it may take several tries before you string your cross bow properly.

Things You'll Need

  • Cross bow stringer
  • Cross bow string
  • Eye protection
Show More

Instructions

    • 1

      String the cross bow stringer with the rope. Make sure the rope ends face the outside of the two end pieces, with the long end of the string between the two sides. Tie the rope ends securely with a square knot on each end.

    • 2

      Place the holes of the cross bow stringer ends over the two sides of the cross bow ends. Make sure the knots face outward and the rope faces inward.

    • 3

      Flip the cross bow safety switch to the "Off" position. Turn the cross bow so that it faces downward and the top of the cross bow faces away from your body. Place your foot on the bracket located near the front end of the cross bow -- the one designed to hold the bow steady as you string the bow.

    • 4

      Pull up on the middle of the rope where the hand guard is located. Pull the rope tightly upward. This will take some pressure, and you will have to hold your foot down very firmly to hold the cross bow steady.

    • 5

      Slide the rope upward so that it latches into the body of the cross bow. All cross bows should have a latch for holding the bow string and stringer, located near the middle of the cross bow. Turn the safety on.

    • 6

      Slip the ends of the bow string over the ends of the cross bow and into the string grooves. Release the bow stringer from the cross bow by pulling up sharply and firmly against the stringer to release it from the trigger. Remove the stringer from the ends of the cross bow. The cross bow is now ready to shoot.