Instructions for a Sigma BC 1600 Bicycle Computer

The Sigma BC 1600 is a bicycle computer used for monitoring the physical output of the rider over customizable distances. For any amateur enthusiast or die-hard professional, this device is extremely useful for accurately and safely improving performance. It is important to use the device correctly to maximize the enjoyment and efficiency that can be derived from this very nifty bicycle computer.

Things You'll Need

  • A sewing needle or equally pointed tool
Show More

Instructions

  1. Setting the Language

    • 1

      Press "mode1" until TAGES-KM (DIST/DAY) appears on display.

    • 2

      Press the "ws1/2" button on the back of the unit until WS1 appears on the screen.

    • 3

      Press "set" on the back for 3 seconds using the needle.

    • 4

      Press "reset" to enter your language (the default language is German).

    • 5

      Press "mode1" to confirm your language.

    Setting the Clock

    • 6

      Press "mode2" until the clock appears.

    • 7

      Press "set" on the back of the unit for 3 seconds using the sewing needle.

    • 8

      Enter the hours with the "reset" button.

    • 9

      Change to minutes by pressing "mode1."

    • 10

      Enter the minutes with the "reset" button. Confirm and quit pressing the "set" button

    Entering the Total Distance for the Wheels

    • 11

      Press "mode2" until TOTODO1 appears on the screen.

    • 12

      Press "set" on the back of the unit for 3 seconds using the needle.

    • 13

      Enter the wheel size number by pressing "reset."

    • 14

      Change the position by pressing "mode1."

    • 15

      Confirm and quit with the "set" button.

    • 16

      Press "mode2" until TOTODO2 appears on the screen. Repeat steps 2 to 5 to enter the total distance for wheel 2.

    Using the Trip Counter

    • 17

      Press "mode2" until TRIP UP or TRIP DOWN appears on the screen.

    • 18

      Press "reset" and "mode1" at the same time.

    • 19

      In "set-modus," change to TRIP UP or TRIP DOWN with the "reset" button.

    • 20

      Change to input with the "mode1" button.

    • 21

      Enter the number with the "reset" button, and change the position with the "mode1" button. Press "mode1" and "reset" at the same time to quit.

    Using the Stopwatch

    • 22

      Press "mode1" until STPWATCH appears on the screen.

    • 23

      Start stopwatch with the "reset" button.

    • 24

      Press "reset" again to stop the clock. (Press "reset" to start it again.)

    • 25

      Press "reset" for more than 2.5 seconds to reset the clock to zero.