Hanging a Dart Board in the Cabinet

Darts is a game that is played in bars and homes around the world, right up to professional levels. You can hang your own dartboard in your house, using a cabinet to conceal it when it is not being used. The cabinet can also cover up any damage made by darts missing the board. Mounting the dartboard inside the cabinet requires a hanging bracket and you should ensure that the level of the dartboard is at the correct height from the floor.

Things You'll Need

  • Hanging bracket
  • Phillips screws
  • Phillips screwdriver
  • Tape measure
  • Spacers
  • Center screw
Show More

Instructions

    • 1

      Line up the hanging bracket's screw holes with the center predrilled holes in the dartboard hanging cabinet. Secure the bracket in place with the provided screws.

    • 2

      Measure 3 inches in from the outer edge of the dartboard. Attach the provided spacers in evenly proportioned distances from each other around the edge.

    • 3

      Turn the dartboard over. Locate the indentation showing the center of the board. If there is no indentation then locate the center manually with a measuring tape. Sink the provided center screw into this position. The screw should stick out from the back of the dartboard slightly further than the spacers.

    • 4

      Turn the board over. Orientate the board correctly (with 20 at the top) and slide the center screw into the hanging bracket. Ensure that the screw is secure in the bracket before releasing the dartboard.