How to Dry a Snowboard After Riding

After your day of riding, it helps to give the snowboard a good wipe down and once over to keep it functioning at peak performance. Snowboards, by design, are made to withstand extreme elements that include slush, ice, snow and -- when those melt -- water. Even though the boards are sealed to prevent delamination, it doesn't hurt to dry the board as soon as possible after your day's session.

Things You'll Need

  • Rags or towels -- lint-free and clean
Show More

Instructions

    • 1

      Set the board up against a post or wall. Wipe the entire board down, using a gloved hand to rid it of any ice or snow accumulation.

    • 2

      Set the board in an entryway stand or a warm room, and let any remaining ice or snow melt and begin to bead off the board. As a courtesy, put a rag under the board so no pools of water accumulate on the floor.

    • 3

      Wipe off the board with a clean towel or nonabrasive rag. Go over the entire front and back, in the bindings and along the edges. Take care not to cut your fingers on the metal edges.

    • 4

      Push the bindings up and down, to ensure the moisture is out of the moving parts.

    • 5

      Inspect the board, once dry. Since you are taking the time to dry and clean the board, check for hits, scratches or any edge damage that requires repairs.