How to: Manamternam ProForm 580X

Using an electric treadmill in the home is an excellent way to accomplish walking or running exercise on a busy schedule. The ProForm 580X is an electric treadmill for home use that requires some set up before it can be used. The treadmill is heavy; it is best to have a helper to get it set up into an operable position.

Things You'll Need

  • Phillips screwdriver
  • Wire cutters
Show More

Instructions

    • 1

      Lay out all the components in the location where you plan on using the treadmill. Insert the wheeled extension legs into the base legs near the front of the treadmill. The warning stickers should be facing up.

    • 2

      Lift the front of the treadmill up with the help of someone else. Secure the extension legs to the base using the four screws and 1/4-inch washers provided. Attach the base pads near the top of the base using the Tek screws.

    • 3

      Secure the latch assembly to the left upright using the provided latch screws. Lift the console near the uprights and route the cables on each side through the bottom holes. You will need another person to hold it in place. Cut the plastic ties holding the cables inside of the upright using the wire cutters. Plug in the cables from the upright into the cables from the console.

    • 4

      Set the console into the upright. Insert the four console bolts into the holes with star washers and tighten using the provided allen wrench. Plug in the treadmill.