Trophy Ridge Leveling Bubble Instructions

Trophy Ridge makes a variety of archery products designed for hunting and target shooting. One accessory or, in some cases, a preinstalled component on compound bows, is the Trophy Ridge Level Bubble. This device mounts into the bow handle brackets and provides a visual reference through the level bubble to use when aiming and entering the proper archery stance. Made to go on the bow quickly, the bubble is a user-intuitive device made to improve form and accuracy.

Things You'll Need

  • Small screwdriver
Show More

Instructions

    • 1

      Mount the Trophy Ridge level bubble onto the bow handle at the site housing --- the cylinder with two different-sized screw holes on the inside. Screw the level bubble via the two bracket arms and the screws to the site housing using a small screwdriver.

    • 2

      Take your shooting stance. Stand with your dominant foot facing forward and your rear foot perpendicular to your body.

    • 3

      Draw the arrow back, and keep the apex of the draw just below your chin. Look down at the level bubble to see whether it is on the level line or to the left or right, indicating your shot will not be accurate.

    • 4

      Turn your arms on the stance without moving your feet to bring the level bubble to plumb. Microadjustments are most effective, so use 1/4- to 1/2-inch adjustments up or down to bring the bubble to plumb. Once plumb, you are ready to fire.

    • 5

      Keep the bubble on plumb, line up the target and fire.