ShelterLogic Canopy Instructions

ShelterLogic canopies are made to use for backyard parties, shelters or shade and rain relief. The canopies are made to go up and take down quickly and with minimal hassle. The company equips the canopies with waterproof ceilings, telescoping poles and storage bags. When breaking down the canopy and placing it in the storage bag, make sure it is completely dry prior to storage to prevent unwanted mildew or mold from developing.

Instructions

    • 1

      Remove the poles, tilt knobs and canopy from the storage bag and set them out on flat ground. Open the telescoping legs by pressing the metal knobs until they are recessed inside the pole locks. Pull the legs down to telescope them into the open position.

    • 2

      Push the open-close leverage bars on both sides of the canopy to open the ceiling and spread out the upper canopy support beams.

    • 3

      Push the telescoping legs into the sleeves on the canopy ceiling. Watch for the metal knobs to pop out in the locked position, indicating the canopy is attached to the legs.

    • 4

      Spread the legs out in the width of the table or structure the tilt knobs will mount to. Place the tilt knobs on the edge of the table or structure and turn the lock clamp clockwise until it is secured on the structure.

    • 5

      Pick up the canopy and legs with a friend. Place the legs in the leg sleeve on the tilt knobs until they lock into position. Turn the knobs counterclockwise to open and then tilt either to the left or right, or stand up the canopy in the dead center position. Turn the knobs clockwise to lock the canopy in position once the tilt has been established.