DIY Satin Finish Golf Club

Golfers sometimes like to differentiate themselves by choosing clubs with a unique appearance. Some golf clubs in recent years have used a satin finish for a sleek look that sets them apart. You can apply your own satin finish to almost any golf club and save the cost of a new set of clubs. You may also choose to paint your clubs an interesting color for an even more striking appearance. As long as you apply the paint carefully, the finish should last for many years.

Things You'll Need

  • Dishwashing detergent
  • Bowl
  • Rag
  • Towel
  • Masking tape
  • 100-grit sandpaper
  • Newspapers
  • Spray primer
  • Satin finish spray paint
Show More

Instructions

    • 1

      Mix a small amount of dishwashing detergent in a bowl with water. Dip the rag in the solution and clean the surface of the club you want to paint. Make sure to remove all dirt and other impediments. Wipe the areas down with a damp cloth to remove any detergent, then dry it with a towel.

    • 2

      Apply masking tape to any areas of the club you don’t want to paint, such as the grip. If you are only painting the club head, make sure to apply tape to the shaft as well.

    • 3

      Rub the surfaces you intend to paint with 100-grit sand paper to scuff up the surface and make it ready to accept paint. Paint does not usually adhere to shiny metal surfaces. Continue rubbing until the surface is slightly rough.

    • 4

      Lay out newspapers under the club to catch the excess paint as you spray. Choose a location with plenty of ventilation to avoid breathing harmful fumes.

    • 5

      Spray the club with primer. Choose a primer that is formulated for use on metal. Use long, even strokes until the area to be painted is covered with an even layer of primer. Allow drying time based on the recommendations on the label before painting.

    • 6

      Spray the club with satin-finish spray paint. Choose a spray paint that is formulated for use on metal and designed for outdoor use. Use long, even strokes until the area has an even coating of paint. Allow drying time based on the recommendations on the label.

    • 7

      Spray additional layers of paint onto the club if desired to achieve a more even coat. Allow plenty of drying time between layers.