How to Mount Bindings Onto New K2 Skis

K2 manufacturers All Mountain, Freeride and Adventure style skis. These skis use advanced technology to provide both rocker -- a type of ski bend and camber -- and core. Before you can use your skis, they will need bindings to allow ski boots to attach to the skis for safe and proper use. Mounting K2 skis requires the instructions and installation kit included with your bindings, as each binding has a different attachment point. There are some basic rules to follow when mounting bindings to K2 skis.

Things You'll Need

  • Ski bench and vise
  • Power drill
  • Binding mounting instructions and kit - determined by your binding choice
  • Screwdriver
  • Allen wrench
Show More

Instructions

    • 1

      Place the K2 skis on the work bench and secure them down with the vise. Make sure the ski bottom is facing down.

    • 2

      Place the binding on the marked ski-binding points on the K2 ski, found in the middle of the ski, to measure out where the holes need to be drilled.

    • 3

      Drill the holes on the ski based on the binding model and placement location recommended by the binding maker.

    • 4

      Align the holes on the binding and the ski and screw the bindings onto the K2 ski. Screw the bindings on with the power drill with a screwdriver bit.

    • 5

      Brush off any debris or sediment left over from the drilling.