How to Adjust the Bindings on a Marker M900

Marker M900 bindings are adjusted according to your DIN number. To find your DIN number, tell a skiing store representative your height, weight, age, boot sole length and skiing ability. The representative will be able to provide you with your DIN number as well as a DIN chart that will tell you how to set your bindings. Once you know what to set your bindings to, adjusting Marker M900 bindings will take a matter of minutes.

Things You'll Need

  • DIN chart
  • Screwdriver
Show More

Instructions

    • 1

      Put on both of your ski boots. Push the toe of one of your boots into the top binding of the ski.

    • 2

      Turn the screw on the side of the bindings with the screwdriver until the arrow on the dial points to the proper number as dictated by your DIN chart.

    • 3

      Push in the clips on the sides of the bindings, and slide the back portion of the bindings either backward or forward so the heel of your boot fits snugly in place. Press the heel of your boot into the back binding until it clicks in place. If the boot can't click in place, the binding needs to be adjusted more.

    • 4

      Repeat Steps 1-3 for the other ski.