How to Mount a Whisker Biscuit on a Bow

The Whisker Biscuit arrow rest -- a full containment arrow rest for bowhunters -- was originally designed to prevent an arrow-shaft from falling to the ground. The original Whisker Biscuit quickly became a go-to arrow rest for beginning and experienced archers; numerous models with different materials and adjustments soon followed. Archers might choose from a variety of models; mounting and installation procedures are the same for all. Properly mounting the Whisker Biscuit increases your potential for shooting accurate groups.

Things You'll Need

  • Allen wrenches
  • Arrow
Show More

Instructions

    • 1

      Place the mounting bracket of the Whisker Biscuit next to the mounting hole on the bow.

    • 2

      Align and square the Whisker Biscuit with the bow. Make small adjustments up or down until it is aligned with the bow.

    • 3

      Tighten the bolt in the mounting hole to secure the Whisker Biscuit to the bow.

    • 4

      Nock an arrow to the bow string to ensure the Whisker Biscuit is level. Make small changes to the elevation adjustment on the rest -- up and down -- until the arrow sits level.

    • 5

      Check the center shot of the bow and rest. The center shot refers to how the arrow is aligned with the bow. Make small changes to the windage adjustment on the rest -- left and right -- until the arrow extends straight out from the bow and rest.